Anker Reverse Engineering – Part 2

Anker Reverse Engineering – Part 2

In This video I have succeeded to up the voltage from 5V to 11V
What need to do is this sequence:
1. Connect VCC (RED WIRE) to 1K resistor through diode Anode (positive) 1N4148 to GNd (BLACK Wire) – this apply 0.7V to be ready for use
2. Connect the D- (GREEN WIRE) to the diode Anode
3. Connect the D+ (White WIRE) to the diode Anode

— now you will have 12V output

The voltage selection is according this Table from Datasheet of NCP4371:

Full datasheet is here: NCP4371 PDF file

Anker Quick charge product on ebay: Anker Quick Charge Products on Ebay
Anker Power core + products on ebay: Anker Power Core + on Ebay
Anker Power Bank 10050mAH on ebay: Anker Power Bank 10050mAH on ebay