Bosch Tools Current Measurement

Bosch Tools Current Measurement

in This Video I am testing the Current that Bosch tools consumption.
Tested with 1.5Ah Slim pack fully charged
The power without load is:
1. For GWS 18-125 V-LI the peak reached 26A, without load it reduced to about 11A continously
2. For HDS-181Compact Hammer Drill it was about 4.5A continous without load
3. For IDH-182 Impact driller EC motor that has 3 speeds it got to
A. just 1A at Low speed without load
B. Just 2A at medium speed
C. Just 4A at high speed

To enable battery you can connect the following:
From GND side 2.7K -> connect to 4.7K this will also be middle on drill -> other side of 4.7K connect near VCC on drill side
****** this will disable tool Heat Protection Circuit ****** it is not recommended doing it!, do this on your own RISK! for short measurement only!

You can buy on Ebay:
HDS-181 cordless Hammer Drill link: http://ebay.to/2xdd7mA
IDH-182 Impact Driller 18V link: http://ebay.to/2uS3DjN
GWS-18 Disk link: http://ebay.to/2ifJ2jC
18V wireless Charger link: http://ebay.to/2x0HFbJ (need wireless battery ready)